Wires (DIN EN 1301-2)2
Here you will find an overview of all the standard materials we offer. In addition, we are also available to you as a development partner for individual alloys.
Please feel free to contact us - we look forward to exchanging ideas with you.
Series 1000
| Description | Chemical composition)1 (DIN EN 573-3. version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW - 1050A |
EN AW - Al99.5 |
0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.07 | 0.05 | - | O H12 H14 H16 H18 |
- 90 100 120 140 |
95 130 - - - |
- - 95 115 135 |
35 7 5 3 3 |
| EN AW - 1070A |
EN AW - Al99.7 |
0.20 | 0.25 | 0.03 | 0.03 | 0.03 | - | 0.07 | 0.03 | - | O H14 H18 |
- 95 125 |
85 - - |
35 90 120 |
35 5 3 |
| EN AW - 1080A |
EN AW - Al99.8 |
0.15 | 0.15 | 0.03 | 0.02 | 0.02 | - | 0.06 | 0.02 | 0.03 Ga | O H14 H18 |
- 90 120 |
80 - - |
- 85 115 |
35 5 30 |
| EN AW - 1090 |
EN AW - Al99.90 | 0.07 | 0.07 | 0.02 | 0.01 | 0.01 | - | 0.03 | 0.01 | 0.03 Ga; 0.05 V | O H14 H16 H18 |
- 85 100 115 |
70 - - - |
- 80 - 110 |
25 3 2 2 |
| EN AW - 1098* |
EN AW - Al99.98 |
0.010 | 0.006 | 0.003 | - | - | - | 0.015 | 0.003 | - | O H14 H16 H18 |
- 85 100 115 |
70 - - - |
- 80 - 110 |
25 3 2 2 |
| EN AW - 1100 |
EN AW - Al 99,0Cu |
Si+Fe ≤ 0,95 |
Cu 0,05-0,20 | ≤ 0,05 | - | - | ≤ 0,10 | - | - | O H12 H14 H16 H18 |
75 95 110 130 150 |
105 - - - - |
- - - - - |
25 |
|
| EN AW - 1199* |
EN AW - Al99.99 |
0.006 | 0.006 | 0.006 | 0.002 | 0.006 | - | 0.006 | 0.002 | 0.005 Ga; 0.005 V | O H14 H18 |
- 70 110 |
60 110 - |
10 80 105 |
40 10 5 |
| - | Al99.999 | 0.0003 | 0.0002 | 0.0002 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | - | H14 H18 |
35 40 |
- - |
- - |
- - |
| EN AW - 1350A |
EN AW - Al99.5 |
0.25 | 0.40 | 0.02 | - | 0.05 | - | 0.05 | - | 0.03 Cr+Mn+Ti+V | O H12 H14 H16 H18 |
- 90 100 120 140 |
95 130 - - - |
- - 95 115 135 |
35 7 5 3 3 |
| EN AW - 1370 |
EN AW - Al99.7 |
0.10 | 0.25 | 0.02 | 0.01 | 0.02 | 0.01 | 0.04 | - | 0.03 Ga; 0.02 B, 0.02 V+Ti | O H14 H18 |
- 95 125 |
85 - - |
35 90 120 |
35 5 3 |
| - | Al99.5Ti0.6 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.07 | 0.55-0.65 | not standardised | H14 | 95 | - | 90 | 5 |
Different alloys on request
* On request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 2000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW - 2011 |
EN AW - AlCu6BiPb |
0.40 | 0.7 | 5.0-6.0 | - | - | - | 0.30 | - | 0.20-0.6 Bi; 0.20-0.6 Pb)4 | H13 H14 H18 T3 T39 (large coil) T39 (coil) T8 (large coil) |
155 170 240 310 340 370 370 |
225 240 - - - - - |
- - - 295 - 310 301 |
- - - 6 4 4 4 |
| EN AW - 2014 |
EN AW - AlCu4SiMg |
0.50-1.2 | 0.7 | 3.9-5.0 | 0.40-1.2 | 0.20-0.8 | 0.10 | 0.25 | - | - | H12 H13 T39 T4 |
190 210 440 380 |
260 280 - - |
180 190 420 255 |
7 5 4 18 |
| EN AW - 2017A |
EN AW - AlCu4MgSi |
0.2-0.8 | 0.7 | 3.5-4.5 | 0.40-1.0 | 0.40-1.0 | 0.10 | 0.25 | - | 0.25 Zr+Ti | H12 H13 T4 |
190 210 380 |
280 300 - |
180 190 255 |
7 5 18 |
| EN AW - 2024 |
EN AW - AlCu4Mg1 |
0.50 | 0.50 | 3.08-4.9 | 0.30-0.9 | 1.2-1.8 | 0.10 | 0.25 | 0.15 | - | O H12 H13 T4 |
- 210 230 420 |
245 280 300 - |
- 180 200 315 |
20 7 5 18 |
| EN AW - 2117 |
EN AW - AlCu2.5Mg |
0.8 | 0.7 | 2.2-3.0 | 0.20 | 0.20-0.50 | 0.10 | 0.25 | - | - | H12 H13 T4 |
150 170 260 |
220 240 - |
100 110 160 |
7 5 20 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
4 Modified according to End of Life Vehicle Directive with Pb < 0.40% also available
Series 3000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW - 3103 |
EN AW - AlMn1 |
0.50 | 0.7 | 0.10 | 0.9-1.5 | 0.30 | 0.10 | 0.20 | - | 0.10 Zr+Ti | O H14 H16 H18 |
- 135 130 170 |
130 180 180 - |
60 120 140 165 |
35 5 4 3 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 4000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW-4043A | EN AW-Al Si5(A) | 4,5-6,0 | ≤0,6 | ≤0,30 | ≤0,15 | ≤0,20 | ≤0,10 | ≤0,15 | O, H111 H12 H14 H16 H18 |
- 120 140 160 185 |
140 160 180 200 - |
70 140 160 180 205 |
25 5 4 4 3 |
||
| EN AW-4046 | EN AW-Al Si10Mg | 9,0-11,0 | ≤0,50 | ≤0,03 | ≤0,40 | 0,20-0,50 | ≤0,10 | ≤0,15 | O, H111 H12 H14 H16 H18 |
- 140 160 180 200 |
160 180 200 220 - |
50 135 155 175 195 |
25 10 4 3 2 |
||
| EN AW-4047A | EN AW-Al Si12(A) | 11,0-13,0 | ≤0,6 | ≤0,30 | ≤0,15 | ≤0,10 | ≤0,20 | ≤0,15 | O, H111 H12 H14 H16 H18 |
- 150 170 190 210 |
170 |
60 145 165 185 205 |
25 10 4 3 2 |
||
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 5000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW - 5005A |
EN AW - AlMg1 |
0.30 | 0.45 | 0.05 | 0.15 | 0.7-1.1 | 0.10 | 0.20 | - | - | O H14 H16 H18 H32 H34 H36 |
- 150 180 200 125 145 170 |
150 200 220 - 170 190 210 |
50 155 185 205 90 130 170 |
25 5 4 3 10 8 6 |
| EN AW - 5019 |
EN AW - AlMg5 |
0.40 | 0.50 | 0.10 | 0.10-0.6 | 4.5-5.6 | 0.20 | 0.20 | 0.20 | 0.10-0.6 Mn+Cr | O H12 H14 H16 H18 H19 H26 H32 H34 H38 |
- 295 325 350 390 420 380 280 310 360 |
330 355 385 400 - - - 340 370 - |
150 255 315 330 360 400 300 205 265 320 |
17 6 3 2 2 1 4 11 8 4 |
| EN AW - 5050 |
EN AW - AlMg1.5 |
0.40 | 0.7 | 0.20 | 0.10 | 1.1-1.8 | 0.10 | 0.25 | - | - | O H12 H14 H18 |
- 160 185 235 |
185 210 235 - |
75 145 190 210 |
16 7 5 4 |
| EN AW - 5051A* |
EN AW - AlMg2 |
0.30 | 0.45 | 0.05 | 0.25 | 1.4-2.1 | 0.30 | 0.20 | 0.10 | - | O H12 H14 H18 H19 |
- 170 195 245 260 |
195 220 245 - - |
85 155 200 220 240 |
15 6 4 3 2 |
| EN AW - 5052 |
EN AW - AlMg2.5 |
0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | 0.10 | - | - | O H12 H14 H16 H18 H32 H34 H38 |
- 215 225 240 275 190 215 260 |
225 265 275 - - 240 265 - |
100 220 225 230 275 145 195 245 |
15 8 4 3 3 11 8 5 |
| AA 5056 | AlMg5 | 0.30 | 0.40 | 0.10 | 0.05-0.20 | 4.5-5.6 | 0.05-0.20 | 0.10 | - | - | O H12 H14 H16 H18 H32 H34 H38 |
- 280 310 340 380 270 300 350 |
320 340 370 390 - 330 360 - |
130 230 300 320 350 215 265 310 |
20 10 5 4 3 12 9 5 |
| EN AW - 5087 |
EN AW - AlMg4.5MnZr |
0.25 | 0.40 | 0.05 | 0.7-1.1 | 4.5-5.2 | 0.05-0.25 | 0.25 | 0.15 | 0.10-0.20 Zr | H19 | 440 | - | 430 | 1 |
| EN AW - 5154A |
EN AW - AlMg3.5 |
0.50 | 0.50 | 0.10 | 0.50 | 3.1-3.9 | 0.25 | 0.20 | 0.20 | 0.10-0.50 Mn+Cr | O H14 H18 H32 H34 |
- 280 330 235 265 |
275 330 - 285 315 |
125 270 320 170 230 |
16 3 2 11 8 |
| EN AW - 5183 |
EN AW - AlMg4.5Mn0.7 |
0.40 | 0.40 | 0.10 | 0.50-1.0 | 4.3-5.2 | 0.05-0.25 | 0.25 | 0.15 | - | H14 | 335 | 395 | 325 | 3 |
| EN AW - 5186 |
EN AW - AlMg4Mn0.4 |
0.40 | 0.45 | 0.25 | 0.20-0.50 | 3.8-4.8 | 0.15 | 0.40 | 0.15 | 0.05 Zr | O H111 H32 H24 |
- - 270 300 |
300 310 330 360 |
115 130 205 255 |
22 14 12 10 |
| EN AW - 5249* |
EN AW - AlMg2Mn0.8Zr |
0.25 | 0.40 | 0.05 | 0.50-1.1 | 1.6-2.5 | 0.30 | 0.20 | 0.15 | 0.1-0.20 Zr | H12 H14 H18 H19 |
230 245 260 285 |
285 310 - - |
230 235 245 275 |
8 4 3 1 |
| EN AW - 5554 A |
AlMg2.7Mn | 0.25 | 0.40 | 0.10 | 0.50-1.0 | 2.4-3.0 | 0.05-0.20 | 0.25 | 0.05-0.20 | O H111 H12 H32 |
215 230 250 250 |
275 280 305 305 |
85-100 90-120 190 180 |
12-18 10-16 3-7 5-10 |
|
| EN AW - 5556A |
EN AW - AlMg5Mn |
0.25 | 0.40 | 0.10 | 0.6-1.0 | 5.0-5.5 | 0.05-0.20 | 0.20 | 0.05-0.20 | - | O H12 H14 H18 H19 |
- 340 390 430 460 |
350 400 450 - - |
150 270 360 400 440 |
17 6 3 2 1 |
| EN AW - 5754 |
EN AW - AlMg3 |
0.40 | 0.40 | 0.10 | 0.50 | 2.6-3.6 | 0.30 | 0.20 | 0.15 | 0.10-0.6 Mn+Cr | O H12 H14 H16 H18 H19 H32 H34 H38 |
- 230 255 280 305 320 220 245 290 |
250 280 305 330 - - 270 295 - |
110 200 250 280 300 310 160 210 260 |
16 6 3 3 2 2 11 8 4 |
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| Description | Chemical composition)1 (DIN EN 573-3. version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
Different alloys on request
* On request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 6000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW - 6056 |
EN AW - AlSi1MgCuMn |
0.7-1.3 | 0.50 | 0.50-1.1 | 0.40-1.0 | 0.6-1.2 | 0.25 | 0.10-0.7 | - | 0.20 max. Zr+Ti | 0 H11/H111 H12/H13)2 H14 H16 T39 (coil) T39 (large coil) T4 T6 (coil) |
- 150 160 180 200 400 360 300 380 |
185 190 200 220 240 - - 380 - |
85 - 140 160 180 350 320 160 340 |
20 - 4 3 3 1 1 13 10 |
| EN AW - 6060 |
EN AW - AlMgSi |
0.30-0.6 | 0.10-0.30 | 0.10 | 0.10 | 0.35-0.6 | 0.05 | 0.15 | 0.10 | - | 0 H14 H18 T39 T39 T4 T89 |
- 145 190 220 270 140 260 |
130 - - - - 210 - |
50 150 180 200 250 90 210 |
25 5 4 3 2 13 6 |
| EN AW - 6061 |
EN AW - AlMg1SiCu |
0.40-0.8 | 0.70 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | - | H13 H14 T39 T4 |
150 170 310 205 |
210 230 - 285 |
120 225 295 135 |
4 2 6 13 |
| EN AW - 6082 |
EN AW - AlSi1MgMn |
0.7-1.3 | 0.50 | 0.10 | 0.40-1.0 | 0.6-1.2 | 0.25 | 0.20 | 0.10 | - | 0 H13)5 H14 H18 T39 (large coil) T39 (coil) T4 T6 (large coil) |
- 165 170 220 280 310 205 310 |
190 225 230 - - - 285 - |
135 130 140 200 - - 135 270 |
13 4 4 2 - - 13 10 |
| EN AW - 6101 |
EN AW - AlMgSi |
0.30-0.7 | 0.50 | 0.10 | 0.03 | 0.35-0.8 | 0.03 | 0.10 | - | 0.06 B | T39 T39 T89 |
220 270 260 |
- - - |
200 250 210 |
3 2 6 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
5 T6 states do not have to be proved for wires that have been thermomechanically treated and marked with index TB or H
Series 7000
| Description | Chemical composition)1 (DIN EN 573-3, version of 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW - 7050 |
EN AW - AIZn6CuMgZr |
0.12 | 0.15 | 2.0-2.6 | 0.10 | 1.9-2.3 | 0.04 | 5.7-6.7 | 0.06 | 0.08-0.15 Zr | H14 | 215 | 295 | 240 | 3 |
| AA 7068* | AlZn7.5Mg2.5Cu2 | 0.12 | 0.15 | 1.6-2.4 | 0.10 | 2.2-3.0 | 0.05 | 7.3-8.3 | 0.10 | 0.05-0.15 Zr | H12 | 200 | 270 | 190 | 3 |
| EN AW - 7075 |
EN AW - AlZn5.5MgCu |
0.40 | 0.50 | 1.2-2.0 | 0.30 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.20 | - | O H111 H12 H13 T6 T73 |
- 190 220 230 510 485 |
275 240 300 310 - - |
110 100 220 230 485 385 |
13 10 4 2.5 10 10 |
| EN AW - 7108A |
EN AW - ALZn5Mg1Zr |
0.20 | 0.30 | 0.05 | 0.05 | 0.7-1.5 | 0.04 | 4.8-5.8 | 0.03 | 0.15-0.25 Zr | |||||
Different alloys on request
* on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 8000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| AA 8076A)6 | AA AlFe0.6Mg0.2 | 0.10 | 0.40-0.8 | 0.04 | 0.02 | 0.06-0.25 | 0.02 | 0.05 | 0.02 | - | H14 | 120 | - | 90 | 5 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
6 Alloy for demanding electrical applications. Mechanical and electrical properties as agreed upon with the customer